Hat Patch Mama DTF Transfer

Available: 99 units in stock

Regular price
$4.00
$4.00
Regular price
Sale price
$4.00
Unit price
 per 

Description

3X2 Laser Engraved Faux Leather

2 Options for applying your patch

Heat Press

Best applied with a hat press 325 degrees for 10 seconds, let cool before checking if adhesive is well applied.

Non- Heat Press

The patches come with a sticky adhesive backing but do require additional glue such as Fabritac or E6000 glue to apply. If you have access to a heat press, you can stick them under the heat press with no heat after applying to ensure an even bond between the adhesive and material fibers.

**Please keep in mind that these patches are laser cut and laser engraved. Each patch is cleaned before being packaged for shipment. However, you may lightly wipe your patch with a very damp cloth or baby wipe to ensure there is no remaining soot on the edges or the design before applying the patch to your item.

**These patches are non-washable. Please do not submerge these in water. Damage to your patch could occur.



DTF Transfer Pressing Instructions:

The new DTF Digital Heat Press Transfers press very similar to regular silkscreen heat transfers or sublimation transfers.

Pre-press the garment to remove moisture and any wrinkles in the pressing area.
  • Press Cotton and Cotton Blends at 285 to 300 degrees for 12-15 seconds.
  • Press Polyester and Nylons at 265 to 275 for 12 seconds
  • Pressure: 50- 60 PSI - #7 or Heavy pressure on a manual press
  • Repress for 5 seconds
Do not use a teflon sheet or teflon bonnet between heat platen and transfer paper.

DTF Transfer Washing Instructions:

  • Wash inside out in cold water.
  • Tumble dry LOW heat